Leave Your Message

Rubber Transformation and Product Pathways During Waste Tire Pyrolysis

In recent years, the resource recovery and utilization of waste tires have garnered sustained attention. Pyrolysis is regarded as a technological route capable of simultaneously recovering oil, gas, and carbon black; its core mechanism involves the thermochemical conversion of rubber under oxygen-free or oxygen-deficient conditions, rather than combustion. Upon heating, the various components of a tire—rubber, carbon black, steel wire, fibers, and additives—undergo distinct transformations, with the changes in rubber being the most critical. Understanding the progression of rubber from an elastomer to small-molecule volatiles and finally to solid residue helps in assessing product yields, quality, and the operational stability of the equipment. In continuous industrial production, continuous waste tire pyrolysis plant typically transform this reaction process into a stable operational workflow through stages such as sealed feeding, zoned temperature control, and oil-gas condensation.

4a144ba95274be930c839d88b24a0748.pngRubber Pyrolysis During the Heating Phase

Rubber pyrolysis does not occur instantaneously at a specific temperature but proceeds progressively as the temperature rises. Between approximately 200°C and 300°C, moisture, residual solvents, and certain low-boiling-point additives within the tire volatilize first, and the rubber's cross-linked network begins to loosen. During this stage, weaker cross-links—such as S–S and C–S bonds—break preferentially; the rubber gradually loses its elasticity, although the polymer backbone has not yet undergone large-scale decomposition.

Upon entering the primary pyrolysis zone (approximately 300°C to 500°C), the C–C bonds in the rubber backbone break extensively, making depolymerization and free-radical pyrolysis the dominant reactions. Natural rubber primarily yields isoprene, limonene, and dimers; styrene-butadiene rubber (SBR) produces styrene, butadiene, toluene, and ethylbenzene; and cis-polybutadiene rubber yields butadiene and vinylcyclohexene. This stage releases significant quantities of pyrolysis oil vapors and combustible gases, serving as the critical interval for determining oil product yields.

As the temperature rises to approximately 500–700°C, primary volatiles undergo further secondary pyrolysis, cyclization, aromatization, and condensation, generating increased amounts of gases such as aromatic hydrocarbons, hydrogen, and methane; meanwhile, carbonaceous residues gradually accumulate to form pyrolytic carbon black. If the temperature rises further above 700°C, the carbon black structure may become more ordered or even partially graphitized, and ash undergoes transformation, resulting in decreased oil yield and increased gas yield.

4a144ba95274be930c839d88b24a0748.pngChemical Bond Cleavage and Product Formation

1a836541448302134030605d000284f6.png

Chemically, tire rubber undergoes cross-link cleavage, main-chain scission, free-radical reactions, and polycondensation into char during pyrolysis. Cross-links break first, causing the three-dimensional network to disintegrate—a process accompanied by some desulfurization. Subsequently, homolytic cleavage of the main chain generates free radicals, which are converted into small molecules via pathways such as β-scission, hydrogen transfer, disproportionation, and cyclization. Some of these small molecules recombine and condense to form coke or pyrolytic carbon, depositing onto the surface of the original carbon black.

Ultimately, the rubber is converted into three types of products: pyrolysis oil (containing aliphatic hydrocarbons, aromatics, limonene, styrene, etc., suitable for use as fuel or chemical feedstock); pyrolysis gas (including hydrogen, methane, ethylene, carbon monoxide, carbon dioxide, hydrogen sulfide, etc.); and solid residues (comprising pyrolytic carbon black, inorganic ash, zinc sulfide, steel wire, and fibers). Product distribution is influenced by factors such as temperature, heating rate, residence time, reactor type, catalysts, and tire composition. Generally, higher temperatures and longer residence times result in lower oil yields and higher gas yields, as well as harder, more carbon-rich carbon black.

4a144ba95274be930c839d88b24a0748.pngKey Control Points for Continuous Industrial Operation

In engineering applications, the reaction stage must be aligned with the unit's control system. Continuous waste tire pyrolysis plant employs zoned temperature control, stable material feeding, and controlled residence times to ensure the rubber undergoes softening, primary pyrolysis, and carbonization across distinct temperature zones, thereby minimizing localized overheating and coking. Pyrolysis oil is obtained through condensation and separation, non-condensable gases can be recycled for heat supply, and solid residues are continuously discharged. Given the significant fluctuations in sulfur, ash, and steel wire content in the feedstock tires, pretreatment and the adjustment of process parameters are crucial. Catalysts can also be employed to modulate the oil composition and the degree of light-fraction yield.

Overall, waste tire pyrolysis is not mere incineration but a controlled thermal decomposition of rubber macromolecules in an oxygen-deficient environment. The rubber is ultimately converted into oil, gas, and carbon black, with the specific transformation pathways determining the efficiency of resource recovery. Understanding the patterns of bond cleavage and the extent of secondary reactions during the heating process is fundamental to enhancing the economic viability and environmental performance of waste tire pyrolysis projects.